Hybrid-racing HR 06+ 8th Gen Civic Si Shifter Cables User Manual

1 8th Gen. Shifter Cables Install Guide for 2006-2011 Civic SI Features:  6061-t6 end links  Spherical bearing pivot  6061-t6 bushing

10 Install Guide STEP 13: Now install the bushing insert into the larger endlink for the transmission side of the cables. Slide it through the bus

11 Install Guide STEP 14: We will start from the underside of the car by feeding them up to the trans-mission side first then into the car on the

12 Install Guide IMPORTANT Make sure that you can go through all 6 gears and reverse. If you hear a click from the transmission when moving the shif

13 Install Guide STEP 18: Next we need to move back under the car to install the mounting plate back to the bottom of the car. Slide the plate bac

14  Make sure when installing the shifter arm selector springs NOT to forget the washer on the small-er spring.  When reinstalling the shifter

15 If you have any questions or comments, please email support at [email protected] Legal Disclaimer Users assume all cost and risk asso

2 Shifter Cable Install guide Installing these shifter cable should take 1-3 hours depending on your ex-perience. If you consider yourself inexperie

3 Shifter Cable Install guide STEP 1: The oem shifter cables are affixed to the transmission by (2) cotter pins and (2) “c”-shaped linkage clips.

4 STEP 4: Once you have removed the heat shield, you will need to remove the (2) mounting brack-ets and the mounting plate using a 10mm socket. For

5 OEM Cable Removal STEP 6: Next you will need to use your 8mm nut driver to remove the (4) bolts that hold the center console down. The front (2)

6 OEM Cable Removal STEP 7: Now that the center console is not at-tached, slide it into the back seat to give yourself room to remove the cables f

7 OEM Cable Removal STEP 8: The shifter cables should now be unattached completely from the shifter and trans-mission, and now you should be able t

8 Install Guide STEP 10: With the assembly out on, we can now swap the springs. This step is much easi-er if you have an another person helping yo

9 Install Guide STEP 11: Now that we have the new springs in-stalled, we can re-install the shifter arm assembly back in the transmis-sion. Before